Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Installing LED Headlights

Model: Honda CR-V MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Accessory kit

See other generations:
Video tutorial

Replacing the headlight bulbs with LED rather than xenon will give the vehicle a more modern and appealing look while improving visibility; open the front bonnet and access the rear of the headlight, disconnect the power connector of the original bulb and remove it from its holder by turning it anti-clockwise; fit the new LED bulb by connecting the power unit and the original connector to the unit itself; then secure the unit with double-sided tape or cable ties.

For the fog lights, it is necessary to detach the chrome bezel to remove the headlight itself and proceed with the bulb replacement, ensuring the unit is positioned correctly.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Installation of LED Interior Lights
Installation of LED Interior Lights
Honda CR-V (2012-2017 / MK 4) Replacing the original bulbs with LED types inside the cabin will give the car a much more modern and appealing look, as well as improve the internal…
Installation of Front Fog Lights
Installation of Front Fog Lights
Honda CR-V (2007-2012 / MK 3) The installation is quite complex and requires at least two hours of work. Remove the engine cover by taking out the seven clips. Remove the screws u…
Installing Front Fog Lights
Installing Front Fog Lights
Honda CR-V (2007-2012 / MK 3) Remove the engine cover by taking out the seven clips. Remove the screws under the caps and the clips securing the bumper located in the wheel arches…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos