Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Front Fog Lights

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Fog lights

See other generations:
Video tutorial

The installation is quite complex and requires at least two hours of work. Remove the engine cover by taking out the seven clips.

Remove the screws under the caps and the clips securing the bumper located in the wheel arches and under the body. After this operation, completely remove the bumper.

The bumper already has provisions for the installation of the fog lights, where the temporary closure caps need to be removed. Insert the seals into the newly freed holes and install the fog lights, securing them with the provided brackets.

Remove the five screws from the wing protection. Install the power cables for the lights, passing them through the designated holes to connect them to the wires pre-ordered by the manufacturer.

Secure the cables and their grounds to the chassis with cable ties. Reassemble the protections.

Connect the newly installed cables to the lights. Correctly reassemble the bumper and the engine cover.

Remove the covers from the steering wheel and replace the light switch lever with one that has a fog light switch. Install the two wires necessary for the fog light activation in the power connector and install the corresponding relay.

Check that everything functions correctly.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Installing Front Fog Lights
Installing Front Fog Lights
Honda CR-V (2007-2012 / MK 3) Remove the engine cover by taking out the seven clips. Remove the screws under the caps and the clips securing the bumper located in the wheel arches…
How to Install Fog Lights on the Honda CR-V?
How to Install Fog Lights on the Honda CR-V?
Honda CR-V (2007-2012 / MK 3) Today, we will see in this short and simple guide how to install the front fog lights on the Honda CR-V, following the instructions below. First, ope…
Where are the Fuses Located in a Honda CR-V?
Where are the Fuses Located in a Honda CR-V?
Honda CR-V (2007-2012 / MK 3) The fuses in the Honda CR-V are located inside the designated fuse boxes mounted on the vehicle: the first is behind the plastic panel located at the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos