Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Jazz
    4. : How to replace front bulbs in Honda Jazz

Honda Jazz - Video tutorial

Model: Honda Jazz MK 2 - Years 2008-2013
Part: Light bulb
Operation: How to replace front bulbs in Honda Jazz

In today's video we see how to replace the front bulbs in the second series of the Honda Jazz. First we buy the specific bulbs of the case, according to the diagram shown in the car's user manual. Once this is done, remember to proceed only and exclusively with a cold engine to avoid possible problems. At this point we can carry out the operation. We open the front hood and access the work area; we remove the plastic cover and proceed to remove the old bulb. Insert the new one and try it, then finish.


Posted on 16 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos