Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Light Bulb on a Honda Amaze

Model: Honda Amaze MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Interior dome light bulb

See other generations:
Video tutorial

If you need to replace the cabin light bulb, you will find the necessary information in the description below and in the video. First, access the cabin and locate the dome light on the ceiling.

Use a plastic pry tool to remove the lens of the dome light. Underneath, you will find the bulb housing.

Proceed to unscrew it and replace it with a new one, installing an LED bulb. Then, reposition the lens of the dome light to snap it back into place, and you're done.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb of the Honda Amaze
How to Replace the Headlight Bulb of the Honda Amaze
Honda Amaze (2018-2025 / MK 2) To replace the headlight bulb of the Honda Amaze, open the hood to access the internal components of the engine bay. Specifically, disconnect the con…
How to Replace the Cabin Air Filter in the Honda Amaze?
How to Replace the Cabin Air Filter in the Honda Amaze?
Honda Amaze (2018-2025 / MK 2) As you can see in this tutorial, replacing the cabin air filter in the Honda Amaze is a very simple and quick task. Since it is located behind the gl…
How to Replace the Cabin Filter in the Honda Amaze?
How to Replace the Cabin Filter in the Honda Amaze?
Honda Amaze (2013-2020 / MK 1) In this tutorial, see how to replace the cabin filter in the Honda Amaze, a very simple and quick task. You will need a utility knife and, of course,…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos