Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Honda Amaze?

Model: Honda Amaze MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Cabin air filter

See other generations:
Video tutorial

In this tutorial, see how to replace the cabin filter in the Honda Amaze, a very simple and quick task. You will need a utility knife and, of course, the correct replacement part.

Start by opening the glove compartment on the passenger side, then remove it from the dashboard by disengaging the hinges on the bottom side. Next, cut along the edge of the housing to create a sufficiently large opening, then remove the old filter and insert the replacement.

Secure the housing with tape or, alternatively, with the specific cover that can be purchased separately.


Updated on 23 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in the Honda Amaze?
How to Replace the Cabin Air Filter in the Honda Amaze?
Honda Amaze (2018-2025 / MK 2) As you can see in this tutorial, replacing the cabin air filter in the Honda Amaze is a very simple and quick task. Since it is located behind the gl…
How to Replace the Engine Oil and Oil Filter of the Honda Amaze
How to Replace the Engine Oil and Oil Filter of the Honda Amaze
Honda Amaze (2018-2025 / MK 2) Follow these steps to replace the engine oil and oil filter of the Honda Amaze in simple and quick steps. First, lift the vehicle and start draining …
How to Replace the Key Battery of the Honda Amaze
How to Replace the Key Battery of the Honda Amaze
Honda Amaze (2013-2020 / MK 1) Replacing the key battery of your Honda Amaze (Mk1) brings the key back to life at a very low cost and in just a few seconds. Let's discover the vari…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos