Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel of the Honda Amaze?

Model: Honda Amaze MK 2 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Door trim panel

See other generations:
Video tutorial

To remove the rear door panel of the Honda Amaze, loosen the screw located in the handle's inner cavity. Once this screw is loosened, you can completely detach the armrest cover by disconnecting the underlying connector.

This will allow you to fully remove the armrest and detach the panel from the door. After the panel is removed, you can install a new replacement part, which should be secured with the corresponding screw in the handle's cavity, and also reinstall the armrest cover.


Updated on 3 August 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in the Honda Amaze?
How to Replace the Cabin Air Filter in the Honda Amaze?
Honda Amaze (2018-2025 / MK 2) As you can see in this tutorial, replacing the cabin air filter in the Honda Amaze is a very simple and quick task. Since it is located behind the gl…
How to Replace the Rear Shock Absorber on a Honda Amaze?
How to Replace the Rear Shock Absorber on a Honda Amaze?
Honda Amaze (2013-2020 / MK 1) To replace the rear shock absorber on a Honda Amaze, lift the car so that the rear wheel corresponding to the shock absorber to be removed is not in …
How to Replace the Remote Battery in the Honda Amaze?
How to Replace the Remote Battery in the Honda Amaze?
Honda Amaze (2018-2025 / MK 2) To replace the remote battery in the Honda Amaze, remove the chrome top part of the device to extract the key from its housing. Once removed, pry ins…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos