Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Civic
    4. : How to replace a wheel arch in the Honda Civic?

Honda Civic - Video tutorial

Model: Honda Civic MK 6 - Years 1995-2001
Part: Bodywork
Operation: How to replace a wheel arch in the Honda Civic?

As we can see in this tutorial, replacing a fender in the Honda Civic is a very simple and quick operation. First of all, let's locate and unscrew the four screws located in the inner area of the fender, then remove the three rivets located below the side skirt and detach it by pushing it towards the front side of the car. Once this is done, unscrew the three fixing bolts of the fender, one located in the upper area and two in the lower area, and separate it from the frame. To install the replacement, it will be sufficient to follow the reverse procedure.


Posted on 21 July 2023 by ScegliAuto



How to remove the front wheel arch of the Honda Civic
Honda Civic (2006-2012 / MK 8) Let's see in this guide how to remove and replace the front wheel arch of the Honda Civic, following the instructions below. First of all we lift the
How to replace the Honda Civic headlight bulb?
Honda Civic (2006-2012 / MK 8) In order to replace the Honda Civic headlight bulb, you need to remove the rivets that secure the inner cover of the wheel arch corresponding to the
How to dismantle the front door in a Honda Civic?
Honda Civic (1995-2001 / MK 6) As we can see in this tutorial, dismantling the front door in the Honda Civic is a very simple and quick operation. First of all, we open both the en

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos