Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Maintenance Reset on a Honda Pilot

Model: Honda Pilot YF2, YF1 - Years 2003-2008
Part: Warning light – error code

Today, let's see how to perform the maintenance reset on a Honda Pilot, specifically models produced from 2006 to 2010. Start the procedure by turning on the vehicle's instrument cluster without starting the engine. Next, press the button on the speedometer until the remaining oil life appears on the small informational display. Once this is done, press and hold the speedometer button until the message starts to flash, then release the button and press it again until the oil life is reset as shown in the video.

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Engine Oil Light on the Honda Pilot
How to Reset the Engine Oil Light on the Honda Pilot
Honda Pilot (2016-2023 / YF5, YF6) Below are the instructions needed to reset the maintenance light for the engine oil change on the Honda Pilot. First, get inside the vehicle and star…
How to reset the engine oil change light on the Honda Pilot
How to reset the engine oil change light on the Honda Pilot
Honda Pilot (2016-2023 / YF5, YF6) In a few minutes we will see how to reset the maintenance service light for the oil change of the Honda Pilot. First of all, we get into the car and …
How to reset the oil light on the 2012 Honda Pilot
How to reset the oil light on the 2012 Honda Pilot
Honda Pilot (2009-2015 / YF3, YF4) To complete the manual reset of the oil light on your 2012 Honda Pilot, it only takes a few seconds. All you have to do is read the following guide a…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos