Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Honda Accord?

Model: Honda Accord MK 9 - Years 2012-2017
Part: Tire pressure warning light

To reset the tyre pressure warning light on the Honda Accord, inflate the tyres to the correct pressure value, which is indicated on the sticker attached to the driver's door pillar. Once all tyres are inflated to the correct pressure, proceed by turning on the ignition, inserting the key into the ignition switch. Once the ignition is on, press and hold the button located to the left of the steering wheel until the warning light disappears.

Updated on 15 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Honda Accord
How to Reset the Tyre Pressure Warning Light on a Honda Accord
Honda Accord (2018-2023 / MK 10) To reset the tyre pressure warning light on a Honda Accord, first turn on the ignition. Then, navigate through the menu on the central display: selec…
How to Reset the Tyre Pressure Warning Light on the Honda Accord
How to Reset the Tyre Pressure Warning Light on the Honda Accord
Honda Accord (2018-2023 / MK 10) The procedure to reset the tyre pressure warning light (TPMS) on the Honda Accord takes just a few seconds; before performing the reset, ensure that …
How to reset the tire pressure light on a Honda Accord?
How to reset the tire pressure light on a Honda Accord?
Honda Accord (2018-2023 / MK 10) To reset the tire pressure light of a Honda Accord, turn on the instrument panel without starting the engine. Use the touchscreen of the central onbo…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos