Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Honda Fit GH 5

Model: Honda Fit GK3, GK4, GP6, GK6, GP5, GK7, GK5, GH7 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

Before reaching the mileage specified by the manufacturer for the service, a warning appears on the dashboard of the Honda Fit to remind you. After completing all operations, you must reset this notification. While seated in the driver's seat, turn the key to power on the dashboard.

Using the button located at the top right of the speedometer, select the oil life indicator on the right. Press and hold the button for about ten seconds until the message starts to blink.

Release the button, then press it again for about five seconds until the updated indication appears.


Updated on 16 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Honda Fit?
How to Reset the Service Light on a Honda Fit?
Honda Fit (2007-2012 / GE) To make the Service light disappear from the instrument cluster of the Honda Fit, first insert the ignition key to turn on the cluster: then press an…
How to Reset the Service Light on a 2011 Honda Fit
How to Reset the Service Light on a 2011 Honda Fit
Honda Fit (2007-2012 / GE) Let's see how to reset the service light on a 2011 Honda Fit: locate the "select/reset" button on the dashboard; it is the round button shown in the …
How to Reset the Service Light in a Honda Fit
How to Reset the Service Light in a Honda Fit
Honda Fit (2007-2012 / GE) To reset the service light in a Honda Fit, turn on the instrument panel without starting the engine and use the SEL/RESET button to display the maint…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos