Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Cabin Fan Motor

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Blower motor

See other generations:
Video tutorial

The fan in question is located under the glove compartment on the passenger side. You will need to pull the black panel located just below the hinges of the glove compartment door.

By simply pulling it, you will release this black panel and gain access to the motor. Disconnect the connector and then remove the screws that secure the motor.

Be careful, as the motor may drop as soon as you remove the last screw. Now, simply extract it and replace the motor.

When reassembling, ensure it is positioned as it was before removal.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Honda CR-V (2002-2007 / MK 2) The cabin air filter on this car model is located on the passenger side, just behind the glove compartment: to replace it, open the glove compartment…
Replacing Fuel Pump Motor
Replacing Fuel Pump Motor
Honda CR-V (1995-2001 / MK 1) If you do not hear the typical whine of the fuel pump coming from under the rear seat when turning on the ignition and the car does not start, it is …
Replacement of Cabin Light Bulb
Replacement of Cabin Light Bulb
Honda CR-V (1995-2001 / MK 1) Using a small plastic spatula, detach the cover glass of the cabin light and unscrew the two fixing screws to remove it, disconnecting the connector …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos