Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Cabin Light Bulb

Model: Honda CR-V MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Interior dome light bulb

See other generations:
Video tutorial

Using a small plastic spatula, detach the cover glass of the cabin light and unscrew the two fixing screws to remove it, disconnecting the connector attached to it. Fit the new light unit with the new bulb type and reconnect the connector, screw in the fixing screws and insert the HOMELINK system into the centre of the light unit.

Reattach the two protective glass covers of the light unit and check the proper functioning of the light switches and the bulbs themselves.

Programme the HOMELINK system following the attached instructions.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

How to Replace the Interior Light Bulb in a Honda CR-V
How to Replace the Interior Light Bulb in a Honda CR-V
Honda CR-V (2007-2012 / MK 3) In this video, see how to replace the bulb in the interior light of a Honda CR-V. Use a screwdriver to pry between the light unit and the plastic tri…
How to replace the fog light bulb on the 2015 Honda CR-V
How to replace the fog light bulb on the 2015 Honda CR-V
Honda CR-V (2012-2017 / MK 4) Today, I will explain how to replace the fog light bulb on the 2015 Honda CR-V. To replace the bulb, you must remove the plastic cover on the bodywor…
Installation of LED Interior Lights
Installation of LED Interior Lights
Honda CR-V (2012-2017 / MK 4) Replacing the original bulbs with LED types inside the cabin will give the car a much more modern and appealing look, as well as improve the internal…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos