Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Onboard Computer in the Honda Pilot?

Model: Honda Pilot YF4, YF3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Warning light – error code

See other generations:
Video tutorial

In this tutorial, you will see how to reset the onboard computer in the Honda Pilot, a very simple and quick operation to perform, for example, as a troubleshooting attempt. First, go inside the cabin, then insert the key and turn on the ignition.

Next, press and hold the "DEST/ROUTE", "MAP/GUIDE", and "CANCEL" buttons for a few seconds. Using the knob, enter "Detail Information & Setting". At this point, select "Functional Setup" and perform the reset using the "All Clear" option.


Updated on 14 October 2026 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light on the 2020 Honda Pilot
How to Reset the Maintenance Light on the 2020 Honda Pilot
Honda Pilot (2016-2023 / YF6, YF5) In this guide for your 2020 Honda Pilot, learn how to quickly and independently reset the maintenance light. First, start the instrument cluster and …
How to Reset the Engine Oil Change Light on a Honda Pilot
How to Reset the Engine Oil Change Light on a Honda Pilot
Honda Pilot (2016-2023 / YF6, YF5) In just a few minutes, we will see how to reset the maintenance service light for the engine oil change on a Honda Pilot. First, get in the vehicle a…
How to Reset the Engine Oil Light on the Honda Pilot
How to Reset the Engine Oil Light on the Honda Pilot
Honda Pilot (2016-2023 / YF6, YF5) Below are the instructions needed to reset the maintenance light for the engine oil change on the Honda Pilot. First, get inside the vehicle and star…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos