Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Atos
    4. : 2011-2022 (MK 2)

Hyundai Atos Years 2011-2022 (MK 2)

Hyundai Atos (2011-2022 / MK 2)
Fuse box location for Hyundai Atos and description of the fuses.
In this video we see where the fuses of the Hyundai Atos are located for the latest version, and their precise explanation in Spanish, with the placement and …read all…
Posted on 18 January 2024 by ScegliAuto
Hyundai Atos (2011-2022 / MK 2)
Where is the windshield wiper fuse located in the Hyundai Atos?
In case the windshield wipers of our Hyundai Atos suddenly stop working, we can first check the condition of the respective fuse, whose location is indicated …read all…
Posted on 28 July 2023 by ScegliAuto
Hyundai Atos (2011-2022 / MK 2)
How to replace the ignition switch of the Hyundai Atos?
First of all, you need to remove the plastics around the steering column that are held with three cross screws (sometimes they are torx screws). Remove the two …read all…
Posted on 21 July 2023 by ScegliAuto
Hyundai Atos (2011-2022 / MK 2)
How to replace the stock car radio with an Android one on the Hyundai Atos.
Today, in this video tutorial, we will see how to dismantle and replace the original radio of the Hyundai Atos, following the instructions below. First, we get …read all…
Posted on 10 June 2023 by ScegliAuto
Hyundai Atos (2011-2022 / MK 2)
Hhyundai Atos gear lever gaiter disassembly
If the Hyundai Atos gear gaiter is damaged by use, we will replace it with a new one. Let's start by unscrewing the five screws that block the central tunnel …read all…
Posted on 26 May 2023 by ScegliAuto
Car stereo (3) Spark plugs (1) Timing belt (4) Checks and maintenance (1) Gearshift gaiter (1) Fog lights (1) Petrol filter (1) Oil filter (1) Hand brake (1) Light bulb (1) Headlight bulb (1) Dashboard light (1) Handle (4) Engine oil (2) Door panel (6) Front bumper (1) Instrument cluster (1) Fuse box (5) Parking sensors (1) Windscreen wipers (1)

See also:

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos