Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Tucson
    4. : Engine

Hyundai Tucson - Engine

Engine Hyundai Tucson (2015-2021 / mk 3, tl)

Hyundai Tucson (2015-2021 / MK 3, TL)
How to Clean the MAP Sensor on Hyundai Tucson
Here’s how to clean the MAP sensor on the Hyundai Tucson. Remove the engine cover, then disconnect the electrical connector for safety. Using a 10mm spanner, …Read all…
Posted on 17 September 2026 by ScegliAuto
Airbag (2) Shocks (1) Car stereo (14) Battery (15) Air vents (1) Control arm (1) Spark plugs (2) Glow plugs (1) Body (7) Control unit (1) Key (59) Timing belt (6) V-belt (2) A/C controls (1) Onboard computer (19) Checks and maintenance (26) Throttle body (1) Dashboard (1) Brake rotors (1) Headlight (4) Tail light (5) Fog lights (4) Air filter (10) Cabin air filter (23) Diesel fuel filter (2) Parking brake (6) Fuel injectors (1) Window switch (2) Accessory kit (1) Light bulb (5) Headlight bulb (17) Tail light bulb (3) Interior dome light bulb (1) License plate light (1) Handle (3) Engine (1) Engine oil (1) Clock (9) Door trim panel (12) Front bumper (3) Rear bumper (3) Brake pads (5) Hydraulic pistons (1) Tires (3) Shift knob (2) Pump (3) Fuel pump (1) Car door (2) Instrument cluster (5) Radiator (1) Heater core (1) Wheel (4) Fuse box (32) Seat (3) Crankshaft position sensor (1) Door lock (4) Oxygen sensor (1) Side mirror (4) Rearview mirror (1) AdBlue warning light (1) Warning light – error code (21) Tire pressure warning light (42) Service warning light (151) Fuel cap (8) Windshield wipers (2) Center console tunnel (2) EGR valve (2) Steering wheel (1)

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos