Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Tucson
    4. : Door lock

Hyundai Tucson - Door lock

Door Lock Hyundai Tucson (2015-2021 / mk 3, tl)

Hyundai Tucson (2015-2021 / MK 3, TL)
Replacement of the front door lock of the Hyundai Tucson.
Today we will go through the steps to disassemble and replace the front door lock of the Hyundai Tucson. First, let's open the front door of the vehicle and …Read all…
Posted on 4 December 2025 by ScegliAuto
Hyundai Tucson (2015-2021 / MK 3, TL)
How to Replace the Lock Cylinder in a Hyundai Tucson?
In this tutorial, you will see how to replace the lock cylinder in a Hyundai Tucson, a very simple and quick operation. First, open the relevant door, then …Read all…
Posted on 6 October 2026 by ScegliAuto
Hyundai Tucson (2015-2021 / MK 3, TL)
How to Remove the Rear Door Lock Actuator on a Hyundai Tucson?
To replace the rear door lock actuator on a Hyundai Tucson, remove the door panel by loosening the screw located in the armrest and disconnecting the relevant …Read all…
Posted on 9 June 2026 by ScegliAuto
Hyundai Tucson (2015-2021 / MK 3, TL)
Replacing the Rear Door Lock on the Hyundai Tucson MK3
In today's tutorial video, you will learn how to dismantle and replace the rear door lock on the Hyundai Tucson third generation, following these simple steps. …Read all…
Posted on 8 June 2026 by ScegliAuto
Airbag (2) Shocks (1) Car stereo (14) Battery (15) Air vents (1) Control arm (1) Spark plugs (2) Glow plugs (1) Body (7) Control unit (1) Key (59) Timing belt (6) V-belt (2) A/C controls (1) Onboard computer (19) Checks and maintenance (26) Throttle body (1) Dashboard (1) Brake rotors (1) Headlight (4) Tail light (5) Fog lights (4) Air filter (10) Cabin air filter (23) Diesel fuel filter (2) Parking brake (6) Fuel injectors (1) Window switch (2) Accessory kit (1) Light bulb (5) Headlight bulb (17) Tail light bulb (3) Interior dome light bulb (1) License plate light (1) Handle (3) Engine (1) Engine oil (1) Clock (9) Door trim panel (12) Front bumper (3) Rear bumper (3) Brake pads (5) Hydraulic pistons (1) Tires (3) Shift knob (2) Pump (3) Fuel pump (1) Car door (2) Instrument cluster (5) Radiator (1) Heater core (1) Wheel (4) Fuse box (32) Seat (3) Crankshaft position sensor (1) Door lock (4) Oxygen sensor (1) Side mirror (4) Rearview mirror (1) AdBlue warning light (1) Warning light – error code (21) Tire pressure warning light (42) Service warning light (151) Fuel cap (8) Windshield wipers (2) Center console tunnel (2) EGR valve (2) Steering wheel (1)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos