Do it yourself
Frequently asked questions about cars and motorcycles

Hyundai Tucson - Pump

Hyundai Tucson (2004-2009 / JM, MK 1)
Hyundai Tucson V6 oil pump replacement guide

Let's see in this guide the main instructions on how to disassemble and replace the oil pump of the Hyundai Tucson V6. First of all, we raise the car and begin …read all…
Posted on 28 July 2022 by ScegliAuto
Hyundai Tucson (2004-2009 / JM, MK 1)
How to replace the power steering pump on the Hyundai Tucson 2.0L

Let's find out in this guide how to disassemble and replace the power steering pump of the Hyundai Tucson 2.0L, but also of the Kia Sportage. First of all we …read all…
Posted on 15 May 2022 by ScegliAuto
Hyundai Tucson (2004-2009 / JM, MK 1)
Replacing the power steering pump on the Hyundai Tucson MK1

In this video tutorial we will see how to disassemble and replace the power steering pump on Hyundai Tucson first series, following the instructions below. …read all…
Posted on 4 March 2024 by ScegliAuto

Shock absorbers (1) Car stereo (11) Battery (12) Arm (1) Spark plugs (1) Bodywork (4) Key (22) Timing belt (4) V-belt (1) -board computer (12) Checks and maintenance (50) Dashboard (1) Brake discs (1) Headlight (1) Tail light (4) Fog lights (3) Air filter (4) Cabin air filter (11) Diesel filter (2) Hand brake (1) Injectors (1) Window lift switch (2) Light bulb (4) Headlight bulb (9) Rear light bulb (2) License plate light (1) Handle (1) Engine (1) Door panel (8) Front bumper (2) Rear bumper (2) Brake pads (3) Hydraulic pistons (1) Tires (1) Pump (3) Fuel pump (1) Instrument cluster (21) Radiator (1) Passenger compartment heating radiator (1) Wheel (1) Fuse box (9) Seat (1) Lock (3) Lambda sensor (1) Outside rearview mirror (3) Interior rearview mirror (1) Windscreen wipers (1) Central tunnel (1)

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos