Do it yourself
| ||||
|
Hyundai Tucson - Video tutorial
Model: Hyundai Tucson
JM, MK 1
- Years 2004-2009 Let's see in this guide the main instructions on how to disassemble and replace the oil pump of the Hyundai Tucson V6. First of all, we raise the car and begin to drain the engine oil, letting it drain in a container for about ten minutes; then we disconnect the V-belt and remove the crankshaft pulley, as shown in the video. At this point we unscrew the screws of the pulley of the engine oil pump, removing it and replacing it with the new one (with the original spare part), following the video tutorial to the end!
Posted on 28 July 2022 by ScegliAuto
Other guides that may interest you
|
How to replace the Ford Transit key batteryBelow I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.046
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |