Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the hood of the Hyundai Tucson

Model: Hyundai Tucson MK 3, TL - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Checks and maintenance

See other generations:
Video tutorial

The following steps will show us how to open the hood of the Hyundai Tucson. First, open the front driver's side door and start pulling the hood release lever that we find at the bottom; then move to the front of the vehicle and unlock the latch pin located in the middle, between the hood and the front bumper, as shown in the video.

At this point, lift the hood, securing the rod to lock it (or held by hydraulic pistons); lower the hood to close it!


Posted on 12 April 2025 by ScegliAuto


Related tutorials

How do you replace the headlight bulb of the Hyundai Tucson?
How do you replace the headlight bulb of the Hyundai Tucson?
Hyundai Tucson (2015-2021 / MK 3, TL) To replace the headlight bulb of the Hyundai Tucson, you need to open the hood so that you can access the components inside the engine compartment: h…
How the Active Bonnet Control System Works on the Hyundai Tucson?
How the Active Bonnet Control System Works on the Hyundai Tucson?
Hyundai Tucson (2015-2021 / MK 3, TL) The active bonnet closure control system of the Hyundai Tucson monitors, via a sensor, whether the lock of the aforementioned bonnet is properly clos…
How to Replace the Front Headlamp Bulb on a Hyundai Tucson?
How to Replace the Front Headlamp Bulb on a Hyundai Tucson?
Hyundai Tucson (2015-2021 / MK 3, TL) To replace the front headlamp bulb on a Hyundai Tucson, open the bonnet to access the components inside the engine bay. Inside the headlamp, you will…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos