Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing belt of the Hyundai Tucson

Model: Hyundai Tucson JM, MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009
Part: Timing belt

See other generations:
Video tutorial

The main steps outlined in this guide will show us the procedure for disassembling and replacing the timing belt of the Hyundai Tucson. First, we open the hood of the car and start disassembling and removing the engine support on the distribution side; we then disconnect the V-belt, removing the crankshaft pulley, as shown in the video.

At this point, we remove the distribution cover to access the belt, then proceed with the removal of the belt and accessory components; we then install the new original distribution components.


Posted on 20 November 2025 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on Hyundai Tucson 2.0 CRDI
How to Replace the Timing Belt on Hyundai Tucson 2.0 CRDI
Hyundai Tucson (2004-2009 / JM, MK 1) In this video, follow the step-by-step instructions to remove and replace the timing belt on a Hyundai Tucson 2.0 CRDI, first series. First, lift the…
Guide to Replacing the Timing Chain on the Hyundai Tucson 1.6 CRDi
Guide to Replacing the Timing Chain on the Hyundai Tucson 1.6 CRDi
Hyundai Tucson (2015-2021 / MK 3, TL) The main instructions in this guide will show you how to remove and replace the timing chain on the Hyundai Tucson 1.6 CRDi 16V. First, open the bonn…
Replacing the Serpentine Belt on the Hyundai Tucson 2.0L GDI
Replacing the Serpentine Belt on the Hyundai Tucson 2.0L GDI
Hyundai Tucson (2015-2021 / MK 3, TL) Let’s explore the steps that will allow us to remove and replace the serpentine belt or alternator belt on the Hyundai Tucson 2.0L GDI. First, raise …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos