Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on the Hyundai i10.

Model: Hyundai I10 IA, MK 2 - Years 2013-2020
Part:

Today we will address a common issue: how to reset the tire pressure monitoring system on a Hyundai I10 vehicle. Before performing the reset, it is important to inspect the tires for any damage and to check the pressure with a gauge to ensure it is at the correct level; if not, use an air compressor to inflate the tires according to the parameters indicated in the vehicle's user and maintenance manual.

To reset the warning light, we need to start the car and drive at a speed of over 40 km/h for about 10 minutes, allowing the system to recognize the correct tire pressure. If the reset fails, we can try inflating each tire by about 3 PSI above the recommended pressure, then completely deflate each tire before inflating them again to the correct pressure. This process may force the TPMS sensor to recognize the correct pressure. After completing this step, we should attempt the reset again by driving the car for a few minutes.

If the reset continues to fail, there may be an issue with the TPMS module; in this case, it is necessary to visit a qualified mechanic to resolve the problem.

Posted on 4 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on the Hyundai I10
How to reset the TPMS light on the Hyundai I10
Hyundai I10 (2019-2026 / AI3, AC3) Today we will explain how to reset the tire pressure warning light on the Hyundai I10. The parameters related to tire pressure on an I10 vehicle are …
How to reset the TPMS sensors on a Hyundai I10
How to reset the TPMS sensors on a Hyundai I10
Hyundai I10 (2019-2026 / AI3, AC3) In this video we see how to reset the tire pressure monitoring system (TPMS) maintenance light on the dashboard of a Hyundai I10: as the artificial i…
How to reset the TPMS light on the Hyundai I10
Hyundai I10 (2013-2020 / IA, MK 2) In this new guide, we will discover the steps to follow in order to carry out the manual reset of the tire pressure monitoring system (TPMS) warning …

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos