|
Do it yourself
| |||
| ||||
How to Change the Headlight of a Hyundai i20
Model: Hyundai I20
GB, IB, MK 2
- Years 2014-2021
In this video, we see that changing the headlight of the Hyundai i20 is not a straightforward task: you need to disassemble half the car just to change a bulb. You will need a Phillips screwdriver, an 8 mm socket wrench, a plastic spatula, and the H7 bulb that needs replacing. First, partially remove the front bumper by loosening the bolts under the bumper on the side of the headlight to be replaced. Remove the side retaining clips with the plastic spatula, and carefully detach the bumper to create working space. Next, replace the headlight by unscrewing the star-shaped fixing bolts, disconnect the electrical connector, and remove the headlight. Replace the bulb by turning the base of the bulb counterclockwise, pulling out the old H7 and inserting the new one without touching the glass with your fingers. Reconnect the connector and check its operation. Refit the headlight by tightening the bolts, reconnect the bumper, ensuring all bolts and clips are properly secured, and check the alignment of the headlights. During the work, be careful with the plastic clips, which may have become brittle over time, and check the seals to prevent water ingress.
Posted on 18 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Hyundai I20
(2014-2021 /
GB, IB, MK 2)
To replace the rear light bulb on the Hyundai I20, detach the plastic cover located next to the light unit, which is accessible only by opening the b…
Hyundai I20
(2008-2014 /
MK 1, PB)
Let's look at how to remove the position bulbs from the Hyundai I20 headlights. Lift the front bonnet and secure it, then remove the plastic cover th…
Hyundai I20
(2020-2026 /
BC3, MK 3)
Today we will see the instructions that will allow us to disassemble and replace the front headlight of the Hyundai I20. First, we open the hood of t…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.106
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |