Do it yourself
Frequently asked questions about cars and motorcycles

Driving Assistance Settings on a Hyundai Tucson MK4

Model: Hyundai Tucson NX4, MK 4 - Years: 2022, 2023, 2024, 2025, 2026
Part: Onboard computer

See other generations:
Video tutorial

Let's see how to set up driving assistance on a Hyundai Tucson MK4: from the main infotainment screen, scroll left and select "setup", then go to "vehicle" where you will select "driving assistance" to access all these submenus: "adaptive speed control" where you can set the distance to maintain from the car in front and the acceleration and reaction speed; Highway Driving Assist which maintains speed, safe distance, and centres the car in the lane: it can be activated or deactivated.

The pre-collision can be set to on/off and adjust the timing of intervention to standard or delayed; Lane Keeping Assist; blind spot monitoring; safe exit assistance (alerts if a vehicle is approaching when opening the doors).

There are also driver attention alarms that monitor the level of attention; the maximum speed limit of the vehicle, and camera settings for parking safety.


Posted on 17 April 2026 by ScegliAuto


Related tutorials

Hyundai Tucson (2022-2026 / NX4, MK 4) On the Hyundai Tucson 2025, an efficient 360° camera is installed, known as the Surround View Monitor (SVM), which is a driving assistance system tha…
Hyundai Tucson (2022-2026 / NX4, MK 4) This video tutorial, it is worth specifying, was filmed in a Hyundai i20, but since it concerns standard settings for Hyundai cars, it can also be co…
Hyundai Tucson (2022-2026 / NX4, MK 4) If you own a Hyundai Tucson MK4 (2023) and want to manually reset the engine oil light correctly, follow the procedure below. First, turn on the igni…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos