Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tyre Pressure Sensor on a Hyundai Kona

Model: Hyundai Kona MK 2 - Years: 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

Replacing the tyre pressure sensor on a Hyundai Kona is a simple and quick operation that you can do yourself. To carry out the replacement, you need to remove the tyres from the vehicle using a cross spanner and jack stands to support the front and rear of the car. After removing the tyre, place it on a workbench or on the ground and insert wooden blocks between the rim and the tyre.

This will allow you to access the tyre sensor for removal. Insert the new tyre pressure sensor and then mount the tyre back onto the vehicle.

Repeat the same procedure for all tyres.


Posted on 30 May 2026 by ScegliAuto


Related tutorials

How do you reset the tire pressure warning light on the Hyundai Kona?
How do you reset the tire pressure warning light on the Hyundai Kona?
Hyundai Kona (2023-2026 / MK 2) It will be possible to completely reset the tire pressure warning light on the Hyundai Kona by first inflating the tires until they reach the correct…
How to reset the TPMS light on the 2025 Hyundai Kona
How to reset the TPMS light on the 2025 Hyundai Kona
Hyundai Kona (2023-2026 / MK 2) Today we will explain how to reset the tire pressure warning light on a 2025 Hyundai Kona vehicle. Press the menu button on the left side of the stee…
How do you reset the tire pressure light of the Hyundai Kona?
How do you reset the tire pressure light of the Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) In order to reset the tire pressure light of the Hyundai Kona, you need to inflate the tires until they reach the recommended pressure value: this va…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos