Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Inspection Reset on a Hyundai Kona

Model: Hyundai Kona MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

See other generations:
Video tutorial

In today’s tutorial video, we will see the entire procedure necessary to perform the inspection reset on a Hyundai Kona, first series model produced from 2017 to 2023. First, turn on the vehicle's ignition, then open the main menu on the speedometer screen and scroll through the various menu screens until you reach the settings.

Once there, using the "OK" button on the right side of the steering wheel, click on "service interval" and then on "reset", finally confirm the entire operation as shown in the video to execute the reset and complete the procedure.


Posted on 16 June 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Warning Light on a 2023 Hyundai Kona
How to Reset the Oil Warning Light on a 2023 Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) To reset the oil warning light on a 2023 Hyundai Kona, first replace the oil and then top up the fluid only after replacing the oil filter. The steps…
How to Reset the "Service" Light on a Hyundai Kona?
How to Reset the "Service" Light on a Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) Hello, this guide aims to reset the "Service" light on your Hyundai Kona. Start the vehicle's instrument panel by pressing the ignition button. Using…
How to reset the tire pressure light on the Hyundai Kona
How to reset the tire pressure light on the Hyundai Kona
Hyundai Kona (2023-2026 / MK 2) The following steps will show us how to reset the tire pressure warning light on the Hyundai Kona; before resetting the TPMS sensors, it is necessary…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos