Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the stereo in the Hyundai Kona

Model: Hyundai Kona MK 1 - Years 2017-2023
Part: Car stereo

Are you planning to replace the Sound System stereo produced by Krell? No problem, here’s how to do it step by step. Ensure you have purchased a compatible replacement part, then park your Hyundai and begin removing the cover behind the display; unclip and pull it off. Move to the driver's area and start unclipping the plastic around the instrument cluster, beginning from the bottom. Next, unclip the air vent panel, which is only secured with push clips. Disconnect the connector. Unscrew the two screws above the display and the other two below, and keep them safe. You can finally dislodge the stereo from its position and proceed with the replacement. Reassemble everything in reverse order.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Hyundai Kona?
How to Reset the "Service" Light on a Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) Hello, this guide aims to reset the "Service" light on your Hyundai Kona. Start the vehicle's instrument panel by pressing the ignition button. Using…
Where is the OBD port located in the 2019 Hyundai Kona?
Where is the OBD port located in the 2019 Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) In this new guide, we will describe the few simple steps required to locate the OBD port in your first series Hyundai Kona (2019 model). First, enter…
Removing the Cabin Filter from the Hyundai Kona
Removing the Cabin Filter from the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) To remove the cabin air filter from the Hyundai Kona, first remove the glove compartment located in the dashboard. Open the glove compartment and unc…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos