Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I20
    4. : Replacing the diesel filter on an I20

Hyundai I20 - Video tutorial

Model: Hyundai I20 IB, MK 2, GB - Years 2014-2021
Part: Diesel filter
Operation: Replacing the diesel filter on an I20

Replacing the diesel filter on a Hyundai I20? We disassemble the battery to access the diesel filter. We raise the front hood, we locate the diesel filter after removing the supply battery. With a socket wrench we unscrew the pin that holds the container where the diesel filter is located. Once the filter has been removed, remove it from the car (replace it with a new filter). Finally, mount the new diesel filter filter (connect pipes and cables) and tighten the appropriate pins with the socket wrench. We close the front hood at the end of assembly. We turn on and test the vehicle.


Posted on 17 December 2023 by ScegliAuto



Replacement of the Hyundai I20 pollen filter
Hyundai I20 (2008-2014 / MK 1, PB) Today's guide will show us the necessary steps to disassemble and replace the cabin air filter or pollen filter of the Hyundai I20. First, we get ins
Hyundai i20 Mk2 cabin air filter replacement location and procedure
Hyundai I20 (2014-2021 / IB, MK 2, GB) The guide shows the location and procedure for replacing the passenger compartment air filter on the Hyundai i20 Mk2. The first step is to remove the
How do you replace the cabin filter of the Hyundai I20?
Hyundai I20 (2014-2021 / IB, MK 2, GB) To replace the cabin filter of the Hyundai I20, you need to remove the plastic panel located on the side of the passenger footwell. Once this panel i

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos