|
Do it yourself
| |||
| ||||
How to Remove the Instrument Cluster on Hyundai Matrix
Model: Hyundai Matrix
MK 1
- Years:
2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Video tutorial
Want to replace the instrument cluster? Let's see how to remove the part from the dashboard (driver's side). Use a lever to remove the covering of the instrument cluster (without breaking the plastic clips) and detach it from the dashboard. Unscrew the securing screws at the bottom of the instrument cluster and remove the part: disconnect the power connectors. After removing the instrument cluster from the dashboard, prepare to install a new part or refit the same one (repair the instrument cluster if necessary). At the end of the installation, test the operation of the instrument cluster.
Updated on 5 April 2026 by ScegliAuto
Related tutorials
Hyundai Matrix
(2001-2010 /
MK 1)
In this video, see where the fuse for the locks is located in a Hyundai Matrix, which is the first thing to check if the locks suddenly stop working.…
Hyundai Matrix
(2001-2010 /
MK 1)
If one or more electrical components of your Hyundai Matrix have suddenly stopped working and you want to check the respective fuses, read this guide…
Hyundai Matrix
(2001-2010 /
MK 1)
To replace the door panel on a Hyundai Matrix, first loosen the screw located in the handle housing, then pry it out completely. Next, remove the scr…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Where is the battery located on the Aprilia Scarabeo 250ie scooter?
This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.132
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |