Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Disable the Bonnet Sensor on Hyundai Veloster

Model: Hyundai Veloster MK 1, FS - Years 2011-2018
Part: Body

In this video, learn how to remove and disable the bonnet sensor on a Hyundai Veloster by following these simple steps. First, open the bonnet and locate the bonnet sensor on the left; then, unscrew the cap and remove the sensor by pulling it down along with its cable, as shown in the video. At this point, you will be able to replace the sensor by disconnecting it from the electrical connector; now, refit the sensor into its housing along with the cap, ensuring that the bonnet warning light turns off correctly when closed!

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine air filter of the 2021 Hyundai Veloster N
How to replace the engine air filter of the 2021 Hyundai Veloster N
Hyundai Veloster (2019-2022 / JS, MK 2) In this new guide, we will explain to you the various steps you need to follow if you want to replace the engine air filter of your 2021 Hyundai Velo…
Where to Find the Engine Fuse Box on a Hyundai Veloster
Where to Find the Engine Fuse Box on a Hyundai Veloster
Hyundai Veloster (2011-2018 / MK 1, FS) To access the engine fuse box on your first-generation Hyundai Veloster, follow this brief procedure described in this new guide. First, lift the fro…
How to reset the service light on the Hyundai Veloster?
How to reset the service light on the Hyundai Veloster?
Hyundai Veloster (2019-2022 / JS, MK 2) In this tutorial, we can see how to reset the service in the Hyundai Veloster, an extremely simple and quick operation to be performed only after com…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos