Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Stalk Switch on the Hyundai I10

Model: Hyundai I10 PA, MK 1 - Years 2007-2013

In this video, you will learn how to remove and replace the stalk switch on the first series Hyundai I10, as well as on other car models with the same system. First, get inside the vehicle and start by removing the screws located on the sides of the steering wheel; then remove the plastic cover and disconnect the electrical connector of the stalk switch, as illustrated in the video. At this point, unclip the old part and replace it with the new one, ensuring the electrical connection is the same; now reassemble everything by following the reverse procedure!

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Fuel Flap on a Hyundai i10
How to Open the Fuel Flap on a Hyundai i10
Hyundai I10 (2013-2020 / IA, MK 2) As clearly shown in the video, opening the fuel flap (petrol) on your Hyundai i10 is very simple. Unlike other cars where you just press the fuel tan…
When to replace the timing belt of a Hyundai I10?
When to replace the timing belt of a Hyundai I10?
Hyundai I10 (2007-2013 / PA, MK 1) The replacement of the timing belt on a first-generation Hyundai i10 (2007-2013), both with a 1.1 MPI (petrol) engine and a 1.2 MPI (petrol) engine, …
Instructions for Replacing the Timing Chain on the Hyundai I10 1.2
Instructions for Replacing the Timing Chain on the Hyundai I10 1.2
Hyundai I10 (2007-2013 / PA, MK 1) In today's guide, you will see the main instructions for removing and replacing the timing chain on the Hyundai I10 1.2 petrol. First, open the bonne…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos