Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : Door handle replacement

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra MK 3, XD - Years 2000-2006
Part: Handle
Operation: Door handle replacement

The first operation to be carried out is to remove the door panel: start by unhooking the triangular plastic cover which is located in correspondence with the external rear-view mirror; remove the pressure caps covering the screws along the edge of the panel, taking care not to damage them; therefore unscrew the panel fixing screws and lever along the edges to release it; disconnect the socket for the window lifter buttons and the courtesy light. Now unscrew the fixing screw of the handle and unhook the tie rods of the lock and of the safety to complete the disassembly. Proceed backwards for re-assembly.


Posted on 20 July 2023 by ScegliAuto



Replace Hyundai Elantra door handle
Hyundai Elantra (2015-2020 / MK 6) Let's see how to replace the exterior door handle of a Hyundai Elantra. We open the door of the Hyundai and remove the cover cap of the hole (on the
Remove the wheel on Elantra
Hyundai Elantra (2006-2010 / HD, MK 4) Do we want to remove the door handle? Let's see how the external handle inside the door of a Hyundai Elantra is removed. We open the door, remove any
How to replace the external handle on the Hyundai Elantra?
Hyundai Elantra (2006-2010 / HD, MK 4) As we can see in this tutorial, replacing the external door handle on the Hyundai Elantra is an extremely simple and quick operation. First, we open

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos