Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Outer Handle on the Hyundai Elantra?

Model: Hyundai Elantra MK 4, HD - Years 2006-2010
Part: Handle

As shown in this tutorial, replacing the outer door handle on the Hyundai Elantra is a straightforward and quick task. First, open the door in question, then locate the small rubber cap on the inner edge and remove it using a flathead screwdriver. Once done, unscrew the bolt accessible through the hole with an 8mm socket, remove the lock cylinder, and push it firmly towards the front of the vehicle to separate the handle from the door. To fit the replacement, simply follow the reverse procedure.

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear outer handle on the Hyundai Elantra?
How to replace the rear outer handle on the Hyundai Elantra?
Hyundai Elantra (2015-2020 / MK 6) In this tutorial, you will see how to replace the rear outer handle on the Hyundai Elantra, a very simple and quick operation. For this, you will onl…
How to Remove the Door Handle on a Hyundai Elantra?
How to Remove the Door Handle on a Hyundai Elantra?
Hyundai Elantra (2021-2026 / MK 7, CN7) To remove the door handle on a Hyundai Elantra, fully open the affected door and locate the rubber cap on the side edge of the door, corresponding to…
Replace Door Handle on Hyundai Elantra
Replace Door Handle on Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) Learn how to replace the external door handle on a Hyundai Elantra. Open the Hyundai door and remove the cover plug from the hole (on the side of the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos