Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : How to replace the external rear handle in the Hyundai Elantra?

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra MK 6 - Years 2015-2020
Part: Handle
Operation: How to replace the external rear handle in the Hyundai Elantra?

In this tutorial we can see how to replace the external rear handle in the Hyundai Elantra, an extremely simple and fast operation. To do this, we will only need a 10mm socket wrench. We start by opening the door in which we are going to work, after which we remove the rubber plug placed on the inner edge and loosen the bolt accessible from the hole. Once this is done, we pull out the lock, grab the handle and remove it by sliding it towards the back of the car. Finally, we place the spare parts and follow the reverse procedure to reassemble everything.


Posted on 20 October 2022 by ScegliAuto



How to disassemble the external door handle of the Hyundai Elantra.
Hyundai Elantra (2006-2010 / HD, MK 4) Let's see the instructions below that will allow us to disassemble and replace the external handle of the front door of the Hyundai Elantra. First, w
How to replace the external door handle of the Hyundai Elantra.
Hyundai Elantra (2015-2020 / MK 6) Today we will discover the steps on how to disassemble and replace the external door handle of the Hyundai Elantra. First, we open the front door of
How to replace the external handle on the Hyundai Elantra?
Hyundai Elantra (2006-2010 / HD, MK 4) As we can see in this tutorial, replacing the external door handle on the Hyundai Elantra is an extremely simple and quick operation. First, we open

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos