Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : How to replace the exterior door handle on your Hyundai Elantra

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra MK 6 - Years 2015-2020
Part: Handle
Operation: How to replace the exterior door handle on your Hyundai Elantra

Today we will see, in this video tutorial, how to disassemble and replace the outside door handle of your Hyundai Elantra, following the instructions below. First of all, we open the front door and start removing the plastic cap that we find on the side of the door; then we unscrew the screw that we find inside it, using a plastic lever to remove the lock cylinder, as shown in the video. At this point we also remove the external handle, replacing it with the new one, applying the reverse procedure for reassembly!


Posted on 22 April 2023 by ScegliAuto



Replace Hyundai Elantra door handle
Hyundai Elantra (2015-2020 / MK 6) Let's see how to replace the exterior door handle of a Hyundai Elantra. We open the door of the Hyundai and remove the cover cap of the hole (on the
How to replace the exterior mirror in Hyundai Elantra?
Hyundai Elantra (2015-2020 / MK 6) In this tutorial we can see how to replace the exterior rearview mirror in the Hyundai Elantra, an extremely simple and fast operation. Let's start b
How to replace the external door handle of the Hyundai Elantra.
Hyundai Elantra (2015-2020 / MK 6) Today we will discover the steps on how to disassemble and replace the external door handle of the Hyundai Elantra. First, we open the front door of

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos