Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santro
    4. : How to paint and polish the wheel covers of Hyundai Santro

Hyundai Santro - Video tutorial

Model: Hyundai Santro MK 3 - Years 2018-2024
Part: Wheel
Operation: How to paint and polish the wheel covers of Hyundai Santro

If we want to paint and make the car wheel covers shiny so that they look like alloy rims, it is necessary to proceed as follows: remove the wheel covers and clean them carefully with a degreaser, then proceed to dry them perfectly and use a polishing varnish. aluminum color. Proceed to carry out the first coat of paint over the entire surface at a distance of about 30 cm from the wheel trim. Then wait 10 minutes for complete drying and proceed with the second pass. Then wait another 10 minutes and proceed with the third and last coat of paint.


Posted on 4 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos