Do it yourself
Frequently asked questions about cars and motorcycles

How to Perform a Service on a Hyundai IX20

Model: Hyundai I20 MK 2, GB, IB - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Checks and maintenance

See other generations:
Video tutorial

In this video tutorial, you can see how to perform a service on a Hyundai IX20. The first step is to purchase 5.3 litres of engine oil (5w 40) and a new oil filter. Lift the bonnet and secure it. Next, remove the engine cover to gain access to the oil filter.

To remove this cover, gently pull it off. Raise the vehicle using a lift or a hydraulic jack and place safety stands underneath. Position a plastic sheet under the car to avoid mess and a container for collecting the used oil. Unscrew the oil drain plug located at the bottom of the oil sump and wait for all the oil to drain into the container.

While waiting for the oil to drain, unscrew the oil filter cap, then replace the filter and the filter gasket. Fit the new filter and screw the drain plug back under the vehicle.

Lower the vehicle and top up with new engine oil.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

Hyundai I20 (2014-2021 / MK 2, GB, IB) Want to replace the rear light bulbs on a Hyundai Ix20 but don’t know how? Here’s how: Open the tailgate and use a screwdriver to unscrew (with a soc…
Hyundai I20 (2014-2021 / MK 2, GB, IB) Today, you will learn how to reset the service light on a Hyundai I20 using a scanner and OBD port. Connect the OBD port to the onboard computer to e…
Hyundai I20 (2020-2026 / MK 3, BC3) Before reaching the required mileage for the service on the Hyundai I20 MK3, a reminder message appears on the instrument panel. After completing the…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Remove the Spare Wheel on a Citroen C4 Grand Picasso

Today, in this short and simple guide, follow the steps to remove the spare wheel from the floor and replace it with the flat one on a Citroen C4 Grand Picasso. First, open the boot's tailgate and start by removing the upper shelf; then use the supplied key to unscrew the spare wheel bolt to remove it, as shown in the video. At this point, lift the vehicle with the jack and unscrew the wheel bolts, replacing it with the spare; then secure it with the bolts, tightening them in a cross pattern!

Watch the video!


by ScegliAuto

More videos