Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Xcent
    4. : How to replace the cabin air filter on Hyundai Xcent

Hyundai Xcent - Video tutorial

Model: Hyundai Xcent MK 1 - Years 2014-2020
Part: Cabin air filter
Operation: How to replace the cabin air filter on Hyundai Xcent

If we have noticed that the flow of air that comes out of the air conditioning vents has been reduced, it is probably necessary to replace the passenger compartment air filter, to do this we will find the instructions and the steps to be carried out in the description below and in the video. After sitting in the passenger seat, proceed to open the glovebox. At the bottom of the compartment on the left side is the filter housing, then proceed to remove the cover and then extract the filter by pulling it towards you. Then go and take the new filter and insert it into the housing and then close the lid and hang up the glove box.


Posted on 26 June 2022 by ScegliAuto

This video is currently unavailable

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos