Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting Side Steps on a Hyundai Tucson

Model: Hyundai Tucson MK 3, TL - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Body

See other generations:
Video tutorial

Learn how to fit side steps on a Hyundai Tucson. A pair of side steps on Amazon costs £339.00, including brackets, clips, and screws (shipping included).

First, remove the original side skirt by unscrewing the first two screws at the front of the vehicle, another two at the rear, and the three lower screws of the splash guard. Use a plastic lever to detach the side skirt.

Clean the area with the holes as you will need to apply adhesive there. Position the brackets over the holes, excluding the first and last.

Now take the support and place the screws, which you will tighten later once all are in place. Next, fit the side step, ensuring both doors are open.

Ensure everything aligns correctly and then apply pressure to secure the side step. At this point, install the lower clips.

Refit the outer screws that were removed when taking off the side skirt. Job done.


Updated on 22 June 2026 by ScegliAuto


Related tutorials

Fitting the Battery on a Hyundai Tucson
Fitting the Battery on a Hyundai Tucson
Hyundai Tucson (2015-2021 / MK 3, TL) In this tutorial video, you will learn how to fit the battery of a Hyundai Tucson, as well as other Hyundai models. After removing the old battery, i…
How to Replace the Timing Chain on the Hyundai Tucson
How to Replace the Timing Chain on the Hyundai Tucson
Hyundai Tucson (2015-2021 / MK 3, TL) To replace the timing chain on the Hyundai Tucson, it is advisable to remove the entire engine block from its bay after loosening the bolts that secu…
How to change the air filter in the Hyundai Tucson
How to change the air filter in the Hyundai Tucson
Hyundai Tucson (2022-2026 / NX4, MK 4) On the Hyundai Tucson, the engine air filter is accessed by opening the engine compartment, inside the classic plastic filter box. Once the hood is o…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos