Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting the Battery on a Hyundai Tucson

Model: Hyundai Tucson MK 3, TL - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Battery

See other generations:
Video tutorial

In this tutorial video, you will learn how to fit the battery of a Hyundai Tucson, as well as other Hyundai models. After removing the old battery, insert the new one into the designated space and secure the bracket with its bolt: tighten using a ratchet spanner with an extension.

Next, attach the side clips of the hose and proceed to connect the positive and negative terminals, tightening with the spanner. At this point, close the bonnet and check that everything is functioning correctly! Remember to purchase the exact battery model for your type of car.


Updated on 21 March 2026 by ScegliAuto


Related tutorials

How to replace the battery of the Hyundai Tucson 3 key.
How to replace the battery of the Hyundai Tucson 3 key.
Hyundai Tucson (2015-2021 / MK 3, TL) To be able to replace the battery inside the key of your third-generation Hyundai Tucson by yourself, just follow the procedure described in this new…
How to Remove the Battery from a Hyundai Tucson MK3?
How to Remove the Battery from a Hyundai Tucson MK3?
Hyundai Tucson (2015-2021 / MK 3, TL) In this tutorial, you will learn how to remove and replace the battery in the third-generation Hyundai Tucson in simple and quick steps. First, open …
How to Change the Battery on a Hyundai Tucson
How to Change the Battery on a Hyundai Tucson
Hyundai Tucson (2015-2021 / MK 3, TL) The instructions in this guide will show you the procedure for removing and replacing the battery on a Hyundai Tucson. First, open the bonnet of the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos