Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of the Hyundai Tucson

Model: Hyundai Tucson TL, MK 3 - Years 2015-2021
Part: Battery

The instructions provided in this guide will show us the procedure for disassembling and replacing the battery of the Hyundai Tucson. First, we open the hood of the car and begin to unscrew the battery bracket screw found at the bottom, using a 12mm socket wrench with extension; then we disconnect both battery terminals (positive and negative), as shown in the video. At this point, we remove and replace the battery with a new one, of the correct type and with the same amperage; finally, we verify the engine start!

Posted on 7 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Hyundai Tucson key.
How to replace the battery of the Hyundai Tucson key.
Hyundai Tucson (2015-2021 / TL, MK 3) If you own a Hyundai Tucson and want to find out how to replace the battery inside the car key, then you just have to follow the steps described belo…
How to replace the battery of the Hyundai Tucson key
How to replace the battery of the Hyundai Tucson key
Hyundai Tucson (2022-2026 / NX4, MK 4) If you intend to replace the battery inside the key of your Hyundai Tucson by yourself, then all you have to do is follow the following procedure. Fi…
How to Replace the Key Fob Battery on the Hyundai Tucson
How to Replace the Key Fob Battery on the Hyundai Tucson
Hyundai Tucson (2010-2015 / LM, MK 2) Here’s a guide on how to disassemble and replace the battery in the key fob for the Hyundai Tucson in simple steps. First, take the key fob and use a…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos