Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : How to replace the outside rear view mirror on Hyundai Elantra 5

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra UD, MK 5, MD - Years 2010-2015
Part: Outside rearview mirror
Operation: How to replace the outside rear view mirror on Hyundai Elantra 5

In the following mini guide dedicated to all of you owners of a Hyundai Elantra fifth series, we will find out how to correctly replace the external rear view mirror. It is an operation that takes a few minutes to complete, but at the same time also a lot of attention. Before starting, make sure you have turned off your car and parked it safely. Then go near the mirror and gently pull it towards you so that it comes out of its seat. Disconnect the two electrical pins present and connect them to the new mirror. Finally, place it correctly.


Posted on 22 December 2022 by ScegliAuto



How to replace the outside rear view mirror on Hyundai Elantra
Hyundai Elantra (2010-2015 / UD, MK 5, MD) In our new mini guide dedicated to your Hyundai Elantra (year 2010-2015) we will describe step by step all the necessary steps to be able to replace
How to replace the exterior mirror in Hyundai Elantra?
Hyundai Elantra (2015-2020 / MK 6) In this tutorial we can see how to replace the exterior rearview mirror in the Hyundai Elantra, an extremely simple and fast operation. Let's start b
How to replace the external rearview mirror on the Hyundai Elantra?
Hyundai Elantra (2010-2015 / UD, MK 5, MD) In this tutorial, we can see how to replace the external rearview mirror in the Hyundai Elantra, an extremely simple and fast operation. First of all

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos