Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : How do you reset the tire pressure warning light on your Hyundai Elantra?

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra UD, MD, MK 5 - Years 2010-2015
Part: Checks and maintenance
Operation: How do you reset the tire pressure warning light on your Hyundai Elantra?

In order to reset the tire pressure warning light on the Hyundai Elantra, first of all you need to bring all the tires back to the pressure value which is shown on the sticker glued to the driver's door pillar: when all the tires have been inflated, you will need to go to the inside the passenger compartment and turn on the instrument panel. Once the latter is on, you will need to hold down the pressure reset button: the latter is located at the bottom right of the steering column. Now it will be necessary to wait for the sensor to read the new pressure values which, if correct, will allow the warning light to go out.


Posted on 4 April 2023 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • Elantra 2010-2015 - Why do the steering wheel controls of the Hyundai Elantra not work? Read Answer
    • Elantra 2021-2026 - What are the warning lights of the Hyundai Elantra? Read Answer
    • Elantra 2015-2020 - What does "service required" mean on the Hyundai Elantra? Read Answer

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos