Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Headlamp Bulb

Model: Hyundai Genesis BH - Years 2008-2016
Part: Tail light bulb

Installing LED bulbs instead of traditional incandescent ones will give the vehicle a more modern look and improve visibility. To replace the rear headlamp bulb, you need to remove the headlamp itself: open the boot, then remove the triangular carpet cover corresponding to the headlamp, unscrew the four fixing pins of the headlamp, disconnect the power socket, and extract the headlamp. Next, unclip the bulb holder, remove the original bulb, and install the LED bulb, repositioning the bulb holder in its place. Finally, reinstall the headlamp.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulbs in the Hyundai Genesis?
How to replace the front headlight bulbs in the Hyundai Genesis?
Hyundai Genesis (2008-2016 / BH) In this tutorial, we can see how to replace the front headlight bulbs in the Hyundai Genesis, an extremely simple and quick operation. First of all, …
Replacing the Cabin Air Filter on the Hyundai Genesis
Replacing the Cabin Air Filter on the Hyundai Genesis
Hyundai Genesis (2008-2016 / BH) Today's guide will show you the instructions to remove and replace the cabin air filter on the Hyundai Genesis. First, open the front passenger door …
Replacement of the Car Radio
Replacement of the Car Radio
Hyundai Genesis (2008-2016 / BH) Removing the car radio is not a difficult task. This guide shows how to speed up the entire process. On the central console of the radio, there are f…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos