Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Tyre Pressure Setting from PSI to Bar on the Hyundai Tucson?

Model: Hyundai Tucson LM, MK 2 - Years 2010-2015
Part:

Let's see how to change the tyre pressure setting on the Hyundai Tucson, which is set to PSI by default (which means pounds per square inch, an imperial measurement). 1 PSI is equivalent to 0.06895 Bar, or 6.895 kPa. If you want to set the pressure in Bar, which is the measurement used in the European Community, you can do so by following these simple instructions: use the "menu" button located on the buttons to the right of the multifunction steering wheel, and look for the "settings" function. Once found, select the sub-menu "other functions" until you find "tyre pressure units," and select "bar." Select it, and you're done.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Tyre Pressure Information on a Hyundai Tucson
Where to Find the Tyre Pressure Information on a Hyundai Tucson
Hyundai Tucson (2022-2026 / NX4, MK 4) This video shows where to find the correct tyre pressure reference for inflating the tyres on a Hyundai Tucson. You will find the label displaying th…
How to Reset the Tyre Pressure Warning Light on a Hyundai Tucson
Hyundai Tucson (2015-2021 / TL, MK 3) This guide briefly explains how to reset the tyre pressure warning light on a Hyundai Tucson. To reset the light, ensure all four tyres are inflated …
How to reset the tire pressure sensor of the Hyundai Tucson
How to reset the tire pressure sensor of the Hyundai Tucson
Hyundai Tucson (2022-2026 / NX4, MK 4) Below we will discover the instructions that will allow us to reset the tire pressure warning light (TPMS) of the Hyundai Tucson. First of all, we ge…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos