Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on the Hyundai H1

Model: Hyundai H1 MK 2, TQ - Years 2007-2023
Part: Cabin air filter

If you need to replace the cabin air filter on this vehicle, follow the instructions provided in the video and the description below. First, access the cabin from the passenger side and open the glove compartment. Release the side locks using a screwdriver and fully flip down the compartment. Underneath, you will find the cover of the filter housing, which you need to pull towards you to detach. Then, remove the old filter and place the new one in the compartment, ensuring that the replacement is suitable and compatible with the vehicle. Finally, press the cover back on and reattach the glove compartment before closing it.

Updated on 6 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Disassembly of the timing chain cover of the Hyundai H1.
Disassembly of the timing chain cover of the Hyundai H1.
Hyundai H1 (2007-2023 / MK 2, TQ) The instructions in this guide will show us the steps on how to disassemble and replace the timing chain cover of the Hyundai H1. In order to remove …
How to change the differential oil on the Hyundai H1?
How to change the differential oil on the Hyundai H1?
Hyundai H1 (2007-2023 / MK 2, TQ) In this guide, we will see the instructions that will allow you to change the rear differential oil on the Hyundai H1. First, perform the oil drain b…
Where are the fuses located in the Hyundai H-1?
Hyundai H1 (2007-2023 / MK 2, TQ) Each fuse in the Hyundai H-1 is contained within designated fuse boxes installed on the vehicle: in this type of vehicle, you will find two boxes. Th…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos