Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel on the Hyundai Tucson

Model: Hyundai Tucson MK 3, TL - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Door trim panel

See other generations:
Video tutorial

Today's guide illustrates the steps necessary to remove and replace the rear door panel on the Hyundai Tucson. First, open the rear door and start unscrewing all the fixing screws found on the sides of the panel and inside the grab handle, using a Torx screwdriver; then pry on the sides of the panel to detach it from the clips, as shown in the video.

At this point, disconnect the electrical connector of the window switch and the handle cable; then refit the door panel by applying the reverse procedure!


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Door Lock Actuator on a Hyundai Tucson?
How to Remove the Rear Door Lock Actuator on a Hyundai Tucson?
Hyundai Tucson (2015-2021 / MK 3, TL) To replace the rear door lock actuator on a Hyundai Tucson, remove the door panel by loosening the screw located in the armrest and disconnecting the…
Replacing the Rear Door Lock on the Hyundai Tucson MK3
Replacing the Rear Door Lock on the Hyundai Tucson MK3
Hyundai Tucson (2015-2021 / MK 3, TL) In today's tutorial video, you will learn how to dismantle and replace the rear door lock on the Hyundai Tucson third generation, following these sim…
How to Replace the Window Switch Button on a Hyundai Tucson
How to Replace the Window Switch Button on a Hyundai Tucson
Hyundai Tucson (2015-2021 / MK 3, TL) Before you begin, open the door of your Hyundai Tucson. Start by prying off the door trim using a thin but sturdy tool. This will expose the screws s…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos