Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs in a Hyundai Xcent?

Model: Hyundai Xcent MK 1 - Years 2014-2020
Part: Headlight bulb

In this tutorial, you will see how to replace the headlight bulbs in a Hyundai Xcent, a very simple and quick operation. For safety, first ensure that the key is not in the ignition, then open the hood and go to the back of the headlight you will be working on. Next, remove the large circular cap, unlock the metal clip, and pull out the old bulb. At this point, disconnect it from the power connector and insert the replacement bulb, avoiding direct contact with it using your bare hands.

Updated on 11 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Changing the Engine Oil and Oil Filter of the Hyundai Xcent 1.2
Changing the Engine Oil and Oil Filter of the Hyundai Xcent 1.2
Hyundai Xcent (2014-2020 / MK 1) In this short and simple guide, you will see the steps that will allow you to perform the routine maintenance service for changing the engine oil and…
How to Replace the Key Fob Battery in a Hyundai Xcent
How to Replace the Key Fob Battery in a Hyundai Xcent
Hyundai Xcent (2014-2020 / MK 1) This video shows how to replace the battery in the key fob of a Hyundai Xcent. The steps are very simple. First, extract the key from its casing by p…
How to Replace the Headlight Bulb on the Hyundai Xcent
How to Replace the Headlight Bulb on the Hyundai Xcent
Hyundai Xcent (2014-2020 / MK 1) Here are the main instructions to help you remove and replace the headlight bulbs on the Hyundai Xcent. First, open the hood of your car and start re…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos