Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. Xcent
  6. : How to replace the headlight bulb on Hyundai Xcent

Hyundai Xcent - Video tutorial

Model: Hyundai Xcent MK 1 - Years 2014-2020
Part: Headlight bulb
Operation: How to replace the headlight bulb on Hyundai Xcent

We see below the main instructions that will allow us to disassemble and replace the headlight bulbs of the Hyundai Xcent. First of all we open the bonnet of our car and begin to remove the plastic cap that we find behind the headlight; after which we disconnect the electrical connector and release the metal clip to remove and replace the low beam bulb with the new one, as shown in the video. At this point we disconnect the position light connector, removing the bulb bulb; let's replace it with the new one and reassemble everything!


Posted on 30 May 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos