Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on the Hyundai XCent

Model: Hyundai Xcent MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Fuel pump

Video tutorial

This guide shows how to replace the fuel pump on the Hyundai XCent Mk1. First, lift the rear seat cushion to access the fuel pump inspection cover. Remove the bolts securing the cover and take it off. Disconnect the electrical connector and the fuel supply hoses.

Clean the area of debris and remove the bolts securing the fuel pump. Pull out the pump assembly and let any trapped fuel drain.

Install the new replacement part and secure everything in place. Start the vehicle a few times to fully fill the pump.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Shoes on a Hyundai Xcent
How to Replace the Rear Brake Shoes on a Hyundai Xcent
Hyundai Xcent (2014-2020 / MK 1) Today, in this video tutorial, learn how to remove and replace the rear brake shoes on a Hyundai Xcent by following the instructions below. First, li…
How to Replace the Headlight Bulbs in a Hyundai Xcent?
How to Replace the Headlight Bulbs in a Hyundai Xcent?
Hyundai Xcent (2014-2020 / MK 1) In this tutorial, you will see how to replace the headlight bulbs in a Hyundai Xcent, a very simple and quick operation. For safety, first ensure tha…
How to Replace the Key Fob Battery in a Hyundai Xcent
How to Replace the Key Fob Battery in a Hyundai Xcent
Hyundai Xcent (2014-2020 / MK 1) This video shows how to replace the battery in the key fob of a Hyundai Xcent. The steps are very simple. First, extract the key from its casing by p…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos