Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Accent
    4. : Headlight indicator bulb replacement

Hyundai Accent - Video tutorial

Model: Hyundai Accent MK 1, LC - Years 1999-2005
Part: Headlight bulb
Operation: Headlight indicator bulb replacement

In order to replace the headlight indicator bulb it is necessary to remove the headlight itself: therefore open the front hood and intercept the fixing pins of the headlight; once the pins have been removed, remove the headlight from its seat by pulling it forward just enough to be able to disconnect the power sockets; at this point unhook the lamp holder of the front indicator, extract the old bulb (bayonet coupling) and insert the new one; proceed in reverse to install the spotlight, first connecting the sockets and then securing it with the relative pins. We will proceed in the same way also on the other lighthouse.


Posted on 24 August 2023 by ScegliAuto



Replacing the headlight bulb on Hyundai Accent
Hyundai Accent (2005-2009 / MK 2, MC) Replacing the headlight bulb on Hyundai Accent is really child's play, a very simple job and within everyone's reach, and now we will prove it to you
How to replace the front headlight bulb of the Hyundai Accent 2010.
Hyundai Accent (2010-2017 / MK 4, RB, RC) After several years of use, it may happen that the headlight bulb of your 2010 Hyundai Accent breaks and needs to be replaced. Below, we will discove
Headlight bulb replacement
Hyundai Accent (1999-2005 / MK 1, LC) To comfortably replace the bulbs of the headlights it is suggested to remove the headlights themselves since it is a very simple operation; start by

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos